Mastodon

4 posts3 participants0 posts today

Dennis HwangWell, I had a hunch it was the hot end mount thing having loose screws, so I took out the hot end and tightened those. I know this because I dealt with it on the A1 Mini. There is definitely value in standardizing your equipment.It’s printing fine on the textured plate now, so I’ll give the super tack plate another try tomorrow.Not in love with these toasty bits though. <a href="https://hwang.me.uk/tags/BambuLab" class="mention hashtag" rel="nofollow noopener noreferrer" target="_blank">#BambuLab</a> <a href="https://hwang.me.uk/tags/3DPrinting" class="mention hashtag" rel="nofollow noopener noreferrer" target="_blank">#3DPrinting</a>

Dennis HwangThe <a href="https://hwang.me.uk/tags/BambuLab" class="mention hashtag" rel="nofollow noopener noreferrer" target="_blank">#BambuLab</a> super tack doesn’t work! At all! Great! (Yes, I washed it.)People are saying to increase the temperature but if I have to do that I might as well use a textured plate that doesn’t require special handling. <a href="https://hwang.me.uk/tags/3DPrinting" class="mention hashtag" rel="nofollow noopener noreferrer" target="_blank">#3DPrinting</a>

LAYEREDI just published a very small project on <a href="https://chaos.social/tags/Makerworld" class="mention hashtag" rel="nofollow noopener noreferrer" target="_blank">#Makerworld</a>. It's a mini set of alternate door handles for your <a href="https://chaos.social/tags/BambuLab" class="mention hashtag" rel="nofollow noopener noreferrer" target="_blank">#BambuLab</a> X1 and P1 printer.<a href="https://chaos.social/tags/3DPrint" class="mention hashtag" rel="nofollow noopener noreferrer" target="_blank">#3DPrint</a> <a href="https://chaos.social/tags/3DPrinting" class="mention hashtag" rel="nofollow noopener noreferrer" target="_blank">#3DPrinting</a> <a href="https://chaos.social/tags/MakersHour" class="mention hashtag" rel="nofollow noopener noreferrer" target="_blank">#MakersHour</a> <a href="https://chaos.social/tags/DIY" class="mention hashtag" rel="nofollow noopener noreferrer" target="_blank">#DIY</a><a href="https://makerworld.com/en/models/1262547-bambu-lab-x1-p1-door-handles#profileId-1287514" rel="nofollow noopener noreferrer" translate="no" target="_blank">https://makerworld.com/en/models/1262547-bambu-lab-x1-p1-door-handles#profileId-1287514</a>

WokStationFINALLY! I've uploaded and entered the Music Box competition at <a href="https://universeodon.com/tags/bambulab" class="mention hashtag" rel="nofollow noopener noreferrer" target="_blank">#bambulab</a> <a href="https://universeodon.com/tags/makerworld" class="mention hashtag" rel="nofollow noopener noreferrer" target="_blank">#makerworld</a>! The thing I've been striving away at all this time is...ROTATING LIGHT-UP MUSICAL EGGS! *crowd goes "ooooo"*Go here, download it, print it, rate it, thumbs it up, whatever! PLEASE! :D <a href="https://universeodon.com/tags/makersHour" class="mention hashtag" rel="nofollow noopener noreferrer" target="_blank">#makersHour</a> <a href="https://universeodon.com/tags/3dprinting" class="mention hashtag" rel="nofollow noopener noreferrer" target="_blank">#3dprinting</a> <a href="https://universeodon.com/tags/allTheHashtags" class="mention hashtag" rel="nofollow noopener noreferrer" target="_blank">#allTheHashtags</a> <a href="https://makerworld.com/en/models/1260242-rotating-musical-eggs" rel="nofollow noopener noreferrer" translate="no" target="_blank">https://makerworld.com/en/models/1260242-rotating-musical-eggs</a>

JamesLooks like this morning will be about listening to podcasts while babysitting the <a href="https://feistycricket.org/tags/BambuLab" class="mention hashtag" rel="nofollow noopener noreferrer" target="_blank">#BambuLab</a> printer. Off-brand filament keeps jamming on the spool. 🧵 Leaning my lesson one jam at a time.

GhandralphDear <a href="https://swiss.social/tags/BambuLab" class="mention hashtag" rel="nofollow noopener noreferrer" target="_blank">#BambuLab</a>. Congrats on the new printer <a href="https://swiss.social/tags/H2D" class="mention hashtag" rel="nofollow noopener noreferrer" target="_blank">#H2D</a>. What a fabulous machine! However: There is a great many things I would print with it but a bicycle helmet is not one of them, go figure why … 🤪. <a href="https://swiss.social/tags/3dprinting" class="mention hashtag" rel="nofollow noopener noreferrer" target="_blank">#3dprinting</a>

Jürgen :verigreen:🌗🪐🌌<a href="https://tyrol.social/tags/3DDrucker" class="mention hashtag" rel="nofollow noopener noreferrer" target="_blank">#3DDrucker</a><a href="https://tyrol.social/tags/BambuLab" class="mention hashtag" rel="nofollow noopener noreferrer" target="_blank">#BambuLab</a> hat den H2D vorgestellt. Ein FDM 3D-"Drucker" der alles hat was schon der X1C hatte - nur schneller (und besser?). Nun aber mit Dual-Extruder, 4 Kameras, Bauraumheizung, max. Düsentemp. bis 350 °C, Filtersystem.Dazu gibt es mit dem "AMS 2 Pro" ein neues Filamentsystem welches nun auch Trockenfunktionen bietet.Was aber wirklich spannend ist: man kann mit diesem Drucker (entweder so bestellt oder nachgerüstet) auch Laserschneiden/-gravieren und sogar plotten. An Lasern gibt es 10 W und 40 W.Also ein Multifunktionsgerät. Eine eierlegende Wollmilchsau? 🤔 Es wird jedenfalls interessant was die ersten Erfahrungen ergeben und wie diese Kombo bei den Kunden ankommt.<a href="https://www.china-gadgets.de/bambu-lab-h2d/" rel="nofollow noopener noreferrer" translate="no" target="_blank">https://www.china-gadgets.de/bambu-lab-h2d/</a>(1/2)

Markus BuchnerNow that the <a href="https://mastodon.social/tags/Bambulab" class="mention hashtag" rel="nofollow noopener noreferrer" target="_blank">#Bambulab</a> <a href="https://mastodon.social/tags/H2D" class="mention hashtag" rel="nofollow noopener noreferrer" target="_blank">#H2D</a> reviews are popping up, just a little reminder, that the <a href="https://mastodon.social/tags/Bambu" class="mention hashtag" rel="nofollow noopener noreferrer" target="_blank">#Bambu</a> affiliate program prohibits creators to say negative things about its products or the company. So every review you can view by now is biased and can not be neutral until someone buys it with his own money<a href="https://fosstodon.org/@layers/113919376905428827" rel="nofollow noopener noreferrer" translate="no" target="_blank">https://fosstodon.org/@layers/113919376905428827</a>

Alexey SkobkinКстати, если кто-то облизывался на принтеры Bambu Lab и срач с прошивкой не перебил желание продолжать облизываться, то возможно сейчас тот самый момент.У них выходит новый принтер и их P1S работающий по системе CoreXY можно купить сильно дешевле - вплоть до 66к рублей в России за базовый набор и до 99к за комбо с AMS.Сами принтеры правда хорошие - я бы только предложил если решите покупать перевести их в LAN режим и не накатывать обновления не прочитав чейнджлоги.P.S. Только имейте в виду, что P1S будет громче, чем A1 если вы не будете его моддить.<a href="https://lor.sh/tags/3D" class="mention hashtag" rel="nofollow noopener noreferrer" target="_blank">#3D</a> <a href="https://lor.sh/tags/printing" class="mention hashtag" rel="nofollow noopener noreferrer" target="_blank">#printing</a> <a href="https://lor.sh/tags/DIY" class="mention hashtag" rel="nofollow noopener noreferrer" target="_blank">#DIY</a> <a href="https://lor.sh/tags/log" class="mention hashtag" rel="nofollow noopener noreferrer" target="_blank">#log</a> <a href="https://lor.sh/tags/sale" class="mention hashtag" rel="nofollow noopener noreferrer" target="_blank">#sale</a> <a href="https://lor.sh/tags/BambuLab" class="mention hashtag" rel="nofollow noopener noreferrer" target="_blank">#BambuLab</a> <a href="https://lor.sh/tags/P1S" class="mention hashtag" rel="nofollow noopener noreferrer" target="_blank">#P1S</a> <a href="https://lor.sh/tags/hardware" class="mention hashtag" rel="nofollow noopener noreferrer" target="_blank">#hardware</a> <a href="https://lor.sh/tags/deals" class="mention hashtag" rel="nofollow noopener noreferrer" target="_blank">#deals</a> <a href="https://lor.sh/tags/pic" class="mention hashtag" rel="nofollow noopener noreferrer" target="_blank">#pic</a>

Dennis HwangAlso? I would probably actually use their support material. It produces somewhat better results, but I’m just not going to remember to dry it for a day every time I want to use it. <a href="https://hwang.me.uk/tags/BambuLab" class="mention hashtag" rel="nofollow noopener noreferrer" target="_blank">#BambuLab</a> <a href="https://hwang.me.uk/tags/3DPrinting" class="mention hashtag" rel="nofollow noopener noreferrer" target="_blank">#3DPrinting</a>

Dennis HwangAllegedly (according to an unsubstantiated internet post), the AMS2 will eventually work with all current <a href="https://hwang.me.uk/tags/BambuLab" class="mention hashtag" rel="nofollow noopener noreferrer" target="_blank">#BambuLab</a> printers.Makes PETG substantially less annoying to deal with on the A1, but won’t fix open-air warping. Comes down to price I think. <a href="https://hwang.me.uk/tags/3DPrinting" class="mention hashtag" rel="nofollow noopener noreferrer" target="_blank">#3DPrinting</a>

xroI now made inline filament clips for spools from <a href="https://chaos.social/tags/Extrudr" class="mention hashtag" rel="nofollow noopener noreferrer" target="_blank">#Extrudr</a>, <a href="https://chaos.social/tags/BambuLab" class="mention hashtag" rel="nofollow noopener noreferrer" target="_blank">#BambuLab</a> and <a href="https://chaos.social/tags/3dkberlin" class="mention hashtag" rel="nofollow noopener noreferrer" target="_blank">#3dkberlin</a><a href="https://www.printables.com/model/1242324-3dkberlin-spool-filament-clip" rel="nofollow noopener noreferrer" translate="no" target="_blank">https://www.printables.com/model/1242324-3dkberlin-spool-filament-clip</a><a href="https://www.printables.com/model/1242081-bambulab-spool-filament-clip" rel="nofollow noopener noreferrer" translate="no" target="_blank">https://www.printables.com/model/1242081-bambulab-spool-filament-clip</a><a href="https://www.printables.com/model/1203127-extrudr-spool-filament-clip-v2" rel="nofollow noopener noreferrer" translate="no" target="_blank">https://www.printables.com/model/1203127-extrudr-spool-filament-clip-v2</a>Would love to hear some feedback.Funny how that started, just because I wanted to fix someone else's model, but that guy sadly (or fortunately? :-) did now answer my request to change away from Makerworlds restrictive default license. So I just made my own parametric and hopefully much better and versatile version.<a href="https://chaos.social/tags/3dprints" class="mention hashtag" rel="nofollow noopener noreferrer" target="_blank">#3dprints</a> <a href="https://chaos.social/tags/freecad" class="mention hashtag" rel="nofollow noopener noreferrer" target="_blank">#freecad</a>

Dennis HwangI mean, cool, but I think most people just want a P1S with 2 hotends. It’s still a better financial value than an XL, but eh. <a href="https://hwang.me.uk/tags/3DPrinting" class="mention hashtag" rel="nofollow noopener noreferrer" target="_blank">#3DPrinting</a> <a href="https://hwang.me.uk/tags/BambuLab" class="mention hashtag" rel="nofollow noopener noreferrer" target="_blank">#BambuLab</a>

BuildByte3D🎉 New Customizable QR Tag! Square format (30–100mm), dual-sided, with optional keychain hook. Add your link + logo, pick styles & colors. Great with AMS or filament swap!🔗 Grab it now on MakerWorld <a href="https://makerworld.com/en/models/1244856-qr-link-tag-minimalist-customizable-square#profileId-1266100" rel="nofollow noopener noreferrer" translate="no" target="_blank">https://makerworld.com/en/models/1244856-qr-link-tag-minimalist-customizable-square#profileId-1266100</a> <a href="https://mastodon.social/tags/3DPrinting" class="mention hashtag" rel="nofollow noopener noreferrer" target="_blank">#3DPrinting</a> <a href="https://mastodon.social/tags/MakerWorld" class="mention hashtag" rel="nofollow noopener noreferrer" target="_blank">#MakerWorld</a> <a href="https://mastodon.social/tags/QRCode" class="mention hashtag" rel="nofollow noopener noreferrer" target="_blank">#QRCode</a> <a href="https://mastodon.social/tags/BambuLab" class="mention hashtag" rel="nofollow noopener noreferrer" target="_blank">#BambuLab</a> <a href="https://mastodon.social/tags/Makers" class="mention hashtag" rel="nofollow noopener noreferrer" target="_blank">#Makers</a>

JakJakI've been having this problem when printing ABS on my Bambu Lab P1S, corners have little dents of under-extrusion on them. Strangely, rolling the firmware back a couple of versions fixed the problem. I got so hung up on the firmware versions that I created a support ticket, and eventually they asked me to factory reset the printer, which did the trick. And while I was at it, I finally tried LAN only mode. Now my P1S is running the latest firmware, blocked from accessing the internet by my router, and able to be controlled from Orca Slicer no problem.Let's see how long I last without Bambu Handy before I go back :)<a href="https://furry.engineer/tags/3dPrinting" class="mention hashtag" rel="nofollow noopener noreferrer" target="_blank">#3dPrinting</a> <a href="https://furry.engineer/tags/BambuLab" class="mention hashtag" rel="nofollow noopener noreferrer" target="_blank">#BambuLab</a>

DeltaWye<a href="https://tiggi.es/tags/bambulab" class="mention hashtag" rel="nofollow noopener noreferrer" target="_blank">#bambulab</a> <a href="https://tiggi.es/tags/p1p" class="mention hashtag" rel="nofollow noopener noreferrer" target="_blank">#p1p</a> troubleshooting report:Symptoms: ▪️“Phfft” noise when bed is moved to the top limit of Z-axis (all the way up). ▪️Noise appeared to go away after the first couple layers (16mm setting) were cleared. ▪️ No obvious impact to printing or performance.Troubleshooting: ▪️Restarted and swapped filament. No change. Moved bed and isolated sound to the back Z-axis rod. ▪️Discovered a blob of plastic that was pretty old sitting on the top of the moving platform. Suspect this was squishing, ejecting air in the tube-like shape, causing the “pfft” sound. See attached image.

DeltaWyeSorry got a little carried away on the tablet there. Tried loading a different filament. Might be harmless but I notice little stuff like that easily.It’s almost like a gentle “phfft” sound when the head touches the print bed on the <a href="https://tiggi.es/tags/bambulab" class="mention hashtag" rel="nofollow noopener noreferrer" target="_blank">#bambulab</a> <a href="https://tiggi.es/tags/p1p" class="mention hashtag" rel="nofollow noopener noreferrer" target="_blank">#p1p</a>.

GhandralphI think I found the reason why my <a href="https://swiss.social/tags/BambuLab" class="mention hashtag" rel="nofollow noopener noreferrer" target="_blank">#BambuLab</a> printer started acting up with <a href="https://swiss.social/tags/underextrusion" class="mention hashtag" rel="nofollow noopener noreferrer" target="_blank">#underextrusion</a> after a massive print failure a few days back. I mustered all my courage and took the printhead apart only to find tons of gunk! <a href="https://swiss.social/tags/3dprint" class="mention hashtag" rel="nofollow noopener noreferrer" target="_blank">#3dprint</a>

amdMeanwhile, my P1S continues its week of being a frustrating garbage machine.At least this print stuck to the bed…These are tried and tested print profiles, I’m thinking maybe it’s a partial clog?<a href="https://techhub.social/@3dprinting" class="u-url mention" rel="nofollow noopener noreferrer" target="_blank">@3dprinting</a> <a href="https://gts.amd.im/tags/3dprinting" class="mention hashtag" rel="nofollow noopener noreferrer" target="_blank">#3DPrinting</a> <a href="https://gts.amd.im/tags/bambulab" class="mention hashtag" rel="nofollow noopener noreferrer" target="_blank">#BambuLab</a>

@byAndreas🤟😌✨My new bambu labs a1 mini, Marvin is such a good bot! Doodled the pattern with curves and geometry nodes, printed a test with minimal amount of geometry🤟😌✨<a href="https://mastodon.art/tags/blender" class="mention hashtag" rel="nofollow noopener noreferrer" target="_blank">#blender</a> <a href="https://mastodon.art/tags/b3d" class="mention hashtag" rel="nofollow noopener noreferrer" target="_blank">#b3d</a> <a href="https://mastodon.art/tags/3dprint" class="mention hashtag" rel="nofollow noopener noreferrer" target="_blank">#3dprint</a> <a href="https://mastodon.art/tags/BambuLab" class="mention hashtag" rel="nofollow noopener noreferrer" target="_blank">#BambuLab</a>

Recent searches

Search options

Administered by:

Server stats:

#BambuLab